Estrogenic chemicals and estrogenic activity in leachate from municipal waste landfill determined by yeast two-hybrid assay

Estrogenic activity and estrogenic chemicals in landfill leachate were investigated by yeast two-hybrid assay and chemical analysis. Leachate sample extracted by liquid-liquid extraction with dichloromethane at pH 7.0 showed a higher dose-response curve than sample extracted at pH 3.0. or than sample extracted by solid phase extraction at either pH 7.0 or 3.0. The fraction extracted at pH 3.0 specifically inhibited not only growth of yeast but also estrogenic activity in this assay, suggesting that it contained anti-estrogenic chemicals. The greatest contributor to estrogenic activity among the chemicals identified in leachate extract was bisphenol A, with an estimated contribution ratio of 84%. The contribution ratios of 4-nonyl phenol (4-np) and 4-tert-octyl phenol (4-t-op) were estimated at 1.0%, and 0.1%, respectively, while natural estrogens such as 17beta-estradiol or estrone were below detection limit, so that their contribution ratio was estimated at no more than 10%. The estrogenic activity of leachate was decreased by aeration treatment alone after 7 days, and was no longer detected after 22 days. Concentrations of bisphenol A, 4-np and 4-t-op likewise decreased with aeration.     

The mild hydrothermal synthesis of hydrogrossular from coal ash

In this study, an attempt was made to synthesize hydrogrossular, a group of garnet minerals, under hydrothermal conditions at temperatures below 180°C, using coal ash, which is the solid waste from thermal power plants, as a starting material. A single phase corresponding to hydrogrossular was found at around 120°C, and the hydrogrossular coexisted with 11-Å tobermorite above 140°C. The hydrogrossular phase decreased with increasing reaction temperature, while that of 11-Å tobermorite increased concurrently. The physicochemical properties of the hydrogrossular obtained from the hydrothermal synthesis was characterized by X-ray diffraction thermogravimetry/differential thermal, analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray fluorescence spectroscopy. Received: September 4, 2000 / Accepted: March 7, 2001     

Implementing China's circular economy concept at the regional level: a review of progress in Dalian, China

The circular economy (CE) concept was introduced in China to address environmental degradation and resource scarcity associated with rapid economic development. Chosen as a demonstration city, Dalian has implemented the CE strategy as a means of conserving water, materials, energy and land. This paper outlines some of the regional CE initiatives that have been successful to date in Dalian, including those focusing on conserving energy and water resources and others focusing on reduced industrial emissions. The paper details the approach used in implementing the CE concept in Dalian, tracing the foci and goals of the program, and the sectoral approach used to implement a CE. Although Dalian municipality has achieved many successes in implementing a CE, our paper identifies several challenges that, until recently, have held back complete implementation. These include: the lack of incentives for older industries to 'green' their operations, the lack of financial support to expand the CE concept, and a broad-based need for heightened public awareness and participation in CE initiatives. Our paper then identifies several responses by Dalian municipality to overcome these challenges, including pricing and tax reforms that serve as conservation incentives, the provision of financial support for CE promotion through budget reorganization, and the organization of CE training programs. Our paper concludes that, although CE initiatives have been successful in Dalian, more is possible and more is needed before Dalian can be designated a true 'eco-city'. The approach used by Dalian can provide guidance for other Chinese cities, although it is recognized that each city must tailor its own approach for differing contexts and conditions.     

Variations in speciated emissions from spark-ignition and compression-ignition motor vehicles in California's south coast air basin

The U.S. Department of Energy Gasoline/Diesel PM Split Study examined the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the contributions of spark-ignition (SI) and compression-ignition (CI) engine exhaust to ambient fine particulate matter (PM2.5). This paper presents the chemical composition profiles of SI and CI engine exhaust from the vehicle-testing portion of the study. Chemical analysis of source samples consisted of gravimetric mass, elements, ions, organic carbon (OC), and elemental carbon (EC) by the Interagency Monitoring of Protected Visual Environments (IMPROVE) and Speciation Trends Network (STN) thermal/optical methods, polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes, alkanes, and polar organic compounds. More than half of the mass of carbonaceous particles emitted by heavy-duty diesel trucks was EC (IMPROVE) and emissions from SI vehicles contained predominantly OC. Although total carbon (TC) by the IMPROVE and STN protocols agreed well for all of the samples, the STN/IMPROVE ratios for EC from SI exhaust decreased with decreasing sample loading. SI vehicles, whether low or high emitters, emitted greater amounts of high-molecular-weight particulate PAHs (benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene) than did CI vehicles. Diesel emissions contained higher abundances of two- to four-ring semivolatile PAHs. Diacids were emitted by CI vehicles but are also prevalent in secondary organic aerosols, so they cannot be considered unique tracers. Hopanes and steranes were present in lubricating oil with similar composition for both gasoline and diesel vehicles and were negligible in gasoline or diesel fuels. CI vehicles emitted greater total amounts of hopanes and steranes on a mass per mile basis, but abundances were comparable to SI exhaust normalized to TC emissions within measurement uncertainty. The combustion-produced high-molecular-weight PAHs were found in used gasoline motor oil but not in fresh oil and are negligible in used diesel engine oil. The contributions of lubrication oils to abundances of these PAHs in the exhaust were large in some cases and were variable with the age and consumption rate of the oil. These factors contributed to the observed variations in their abundances to total carbon or PM2.5 among the SI composition profiles.     

Optimal turning method of composting regarding hygienic safety

The new tuming method was proposed and verified its effectiveness to pathogens by laboratory scale experiments. Considering the results obtained from the previous studies, it could be said that tuming of a composting pile was essential in terms of hygienic aspects but the number of tuming should be minimized. Effectiveness of inactivation was estimated for each composting run. From this estimation,tuming by layers, which is different from conventional tuming that mixes compost pile entirely, was proposed and investigated its performance by experiments. Composting operations with static pile method, complete mix(conventional) tuming method, and proposed tuming( layer tuming) method were done and their effectiveness on inactivation of indicator microorganism was evaluated and compared.As results, the conventional tuming method was not a proper method in terms of pathogen inactivation, whereas, the proposed tuming method showed an excellent performance and should be employed in a composting operation.     

Properties of the 2,3,7,8-TCDD receptor- a QSAR approach

The Ah or 2,3,7,8-TCDD receptor protein plays an important role in mediating the biologic, toxic and genotoxic effects of aryl and halogenated aryl hydrocarbons. An assessment of the physicochemical parameters which facilitate ligand: receptor interactions was determined by multiple parameter linear regression analysis of the relative receptor binding affinities of a series of 7-substituted-2,3-dichlorodibenzo-p-dixoins (Eq 1), 8-substituted-2,3-di (Eq. 2) and 2,3,4-trichlorodibenzofurans (Eq 3). The results demonstrate that substituent lipophilicity (π) and molecular volumes were

(Eq.1)

log (I/EC₅₀) = 1.24 π + 6.10

(Eq.2)

log (I/EC₅₀) = 1.10 π + 5.19

(Eq.3)

log (I/EC₅₀) = 1.09 π + 5.77

the major determinant factors governing interactions between the rat hepatic cytosolic receptor protein and the diverse substituted ligands. It has been shown that there are marked differences in species sensitivity to 2,3,7,8-TCDD (i.e. guinea pig > rat maice > hamster) although hepatic receptor levels in these species are comparable. QSAR analysis of the receptor binding EC₅₀ data for the 7-substituted-2,3-dichlorodibenzo-p-dioxins using rat (Eq. 1), mouse (Eq. 4), guinea pig (Eq. 5) and hamster (Eq. 6) hepatic cytosol demonstrated that there were significant differences in these equations. However it was also noted that

(Eq.4)

log (I/EC₅₀) = 0.95 + 0.93 E_s + 5.28

(Eq.5)

log (I/EC₅₀) = 0.94 + 0.579 σ_p + 6.13

(Eq.6)

log (I/EC₅₀) = 0.70 + 1.227 σ_p + 6.38

physicochemical factors which are important for ligand-receptor interactions were identical for the most sensitive (guinea pig) and least sensitive (hamster) species. These results indicate that events which follow the initial ligand-receptor interaction must be the major factors which determine species sensitivity to 2,3,7,8-TCDD.     

Evaluation of regional bioenergy recovery by local methane fermentation thermal recycling systems

This paper evaluates the potential for regional bioenergy recovery as electricity and heat by small-scale methane fermentation systems from organic waste matter generated from urban, industrial, and agricultural sectors. Biogas production functions of high-strength organic wastes are derived from data of implemented methane fermentation systems. The distributions of organic wastes from sewage, household, wholesale/retail, manufacturing, farming, and livestock activities in the Tokyo Bay region are calibrated into a disaggregated spatial database by compiling general activity statistics and emission intensity parameters using Geographic Information System (GIS). Three scenarios of organic matter circulation by co-digestion in sewage treatment plants (STPs) are designed and assessed. Surplus electricity and heat from methane fermentation systems are used for STP operations and household demand. The spatial database allows a preliminary examination for the suitability of locations for technology implementation from the aspects of bioenergy supply and balance. The results show that an additional 368,000-1,328,000MW of electricity would be generated, and 1300-3600TJ of heat could be used by households, reducing the annual emissions of CO(2) from fossil fuels by 307,000-798,000t.     

Characterization of solid-phase microextraction and gas chromatography for the analysis of gasoline tracers in different microenvironments

Gasoline tracers were collected on solid-phase microextraction (SPME) fibers and analyzed by capillary gas chromatography with photoionization detector (GC/PID). This was part of a larger study to quantify personal exposure to motor vehicle gasoline evaporative and combustive emissions in high-end exposure microenvironments (MEs). The SPME fiber selected for this application was a 75-microm carboxen/polydimethylsiloxane. Sequential 10-min samples were collected for measurement of benzene, toluene, ethylbenzene, and ortho-, meta-, and para-xylene in different MEs in Atlanta, GA, in summer 2002 and Reno, NV, in spring 2003. Field calibrations were performed with certified gas standards in 1-L Tedlar bags for varying concentrations and exposure times. SPME detection limits were approximately 0.2 ppbv with a precision of 3-17% and accuracy of 30%. A dynamic system was designed for temperature and relative humidity calibrations, with corrections for the effects of these variables performed when necessary. SPME data compared satisfactorily with integrated canister samples, continuous PID, and field portable mass spectrometer data.     

Characterization of Solid-Phase Microextraction and Gas Chromatography for the Analysis of Gasoline Tracers in Different Microenvironments

Abstract

Gasoline tracers were collected on solid-phase microextraction (SPME) fibers and analyzed by capillary gas chromatography with photoionization detector (GC/PID). This was part of a larger study to quantify personal exposure to motor vehicle gasoline evaporative and combustive emissions in high-end exposure microenvironments (MEs). The SPME fiber selected for this application was a 75-µm carboxen/polydimethylsiloxane. Sequential 10-min samples were collected for measurement of benzene, toluene, ethylbenzene, and ortho-, meta-, and para-xylene in different MEs in Atlanta, GA, in summer 2002 and Reno, NV, in spring 2003. Field calibrations were performed with certified gas standards in 1-L Tedlar bags for varying concentrations and exposure times. SPME detection limits were ～0.2 ppbv with a precision of 3–17% and accuracy of 30%. A dynamic system was designed for temperature and relative humidity calibrations, with corrections for the effects of these variables performed when necessary. SPME data compared satisfactorily with integrated canister samples, continuous PID, and field portable mass spectrometer data.